Scopes
Peeling Ceilings
- Stripping flaking paint
- Surface preparation for a smooth finish
- Oil-based primer for maximum adhesion
- Application of high-quality, durable paint
Interior
Ceilings:
- Any flaking or peeling paint to be scraped off, any stains sealed with oil based sealer, any gaps, cracks and holes filled and sanded down.
- Two coats of flat ceiling white acrylic applied.
- Wet areas to be done in Anti Mould low sheen acrylic.
Walls:
- Any flaking paint to be scraped off prior to any gaps, cracks, holes filled and sanded down.
- Two coats of interior acrylic applied.
Painted Woodwork:
-
To be lightly sanded down and dusted off, any gaps, cracks and holes filled.
-
Primed or spot primed with one coat of undercoat followed by two coats of acrylic oil based enamel applied.
-
Stained / varnished woodwork:
-
To be lightly sanded down, followed by two coats of stain/or varnish applied.
-
Bare Gyprock:
-
To be dusted down and sealed with one coat of gyprock sealer prior to other coatings.
-
EXTERIOR
Gutters & downpipes:
-
Two coats of exterior acrylic applied.
-
Fascias:
-
Any flaking paint to be scraped off, primed or spot primed with one coat of undercoat,
-
any gaps and cracks filled and sanded down.
-
Two coats of exterior acrylic applied.
-
Eaves:
-
To be dusted down, any gaps and cracks and holes filled and sanded down.
-
Two coats of exterior acrylic applied.
-
Weatherboards & gables
Any flaking paint to be scraped off, primed or spot primed with one coat of undercoat. General gapping will be done but no gapping between/underneath weatherboards unless stated otherwise.
- Two coats of exterior acrylic applied.
Woodwork ( Windows, Doors, Frames)
-
To be sanded down and dusted off, any gaps, cracks and holes filled.
-
Primed or spot primed with one coat of undercoat followed by two coats of enamel applied.
-
Timber Handrails:
-
Any flaking paint to be scraped off, primed or spot primed with one coat of undercoat followed by two coats of exterior acrylic applied. .
-
Metal handrails:
-
To be lightly sanded down and dusted off, primed or spot primed with one coat of undercoat followed by two coats of top coats applied.
-
Timber Decks:
-
To be washed down with timber reviver product to help bring the timber back to life, followed by two coats of Dexspress applied.
-
Rendered walls:
-
To be dust and blocked down followed by one coat of render sealer, followed by two coats of exterior acrylic applied.
-
Brick Painting:
-
To be dusted down followed by two coats of exterior acrylic applied.
-
Timber Posts:
-
To be lightly sanded down and dusted off, primed or spot primed with one coat of primer followed by two coats of exterior acrylic applied.
-
Metal Posts:
-
To be lightly sanded down and dusted off, primed or spot primed with one coat of etch metal primer followed by two coats of metal shield applied.
-
Concrete surfaces:
-
To be pressure cleaned with a commercial grade high pressure cleaner to remove any dirt, dust and grime followed by two coats of concrete sealer.
-
METAL ROOF
To be washed using a water blaster that produces 4,000 psi of pressure, this will remove all mould, dirt, dust off the existing surface.
- Apply Metal Etch rust cure primer to any rust spots.
- Apply ONE coat of sealer / primer coat to the entire roof.
- Apply 2 coats of acrylic membrane coats in the colour of your choice.
- Paint coats to be applied with a commercial airless paint sprayer.
TILED ROOF
To be washed down using a pressure cleaner that produces 4,000 psi of pressure, this will remove all mould, dirt and dust off the existing surface.
- Apply a ONE coat of sealer / primer coat to the entire roof.
- Apply TWO coats of acrylic membrane coats in the colour of your choice.
- Paint coats to be applied with a commercial airless paint sprayer.
- Re-bed any loose caps of ridge capping. ( If necessary )
- Re-point all ridge caps with a flexible pointing mortar. ( If necessary )
DRIVEWAYS
Pressure to clean the driveway using a water blaster that produces 4,000 psi of pressure, this will remove all mold, dirt and dust off the existing surface.
- Apply a TWO coat of Dulux Avista Concrete Sealer.
- Paint to be applied by Roller and Brush as per Manufacturer specification
